Type 900M-T-I nozzle/pointed nozzle

Product name: 900M-T-I nozzle/pointed nozzle

Features:welding headThe tip is subtle.

Scope of application: suitable for precision welding or narrow welding spaceAnd the welding bridge generated by the welding chip can be corrected.

Only when you know how to maintain it can you use it

1. try to use low temperature welding

High temperature will accelerate the oxidation of welding head and reduce the life of welding head; If the temperature of welding head exceeds 470°C, its oxidation rate is twice that of 380 C.

2. Don't put too much pressure on it

When welding, please do not apply too much pressure, otherwise the welding head will be damaged and deformed; As long as the welding head can fully contact the solder joint, the heat can be conducted.

3. Always insist on tin in welding head

This can reduce the oxidation time of welding head and prolong the life of welding head; After application, the new solder should be added after the welding head temperature drops slightly, so that the tin coating has a good anti-oxidation effect.

4. Adhere to the clean and timely arrangement of oxides in welding head

If there is black oxide on welding head, welding head may not be coated with tin, so it should be sorted immediately. When finishing, adjust the temperature of welding head to 250°C, and then clean the welding head with clean cotton until it is clean and then tin.

5. Choose flux with low activity

Flux with high activity or strong corrosivity will accelerate the corrosion of welding head when heated, so low corrosivity flux should be selected.